OSI/AS Management Programming Manual

ALTER PROFILE Command
Commands and Responses
5–62 056785 Tandem Computers Incorporated
CUG ID of the associated X25AM line. To clear a previously specified CUG
ID, assign the value ZOSI-VAL-CUG-RESET to this field.
ZX25DESTADDR
is the network address to be used by the subdevice as the called address in
outgoing call-request packets in X.25 networks. The network address is a
string of up to 15 decimal digits (0 through 9). To reset this attribute to its
default value (all blanks), assign the value ZOSI-VAL-ADDR-RESET-BYTE to
the first byte of the field.
ZX25NEGOT-L3-WIN, ZX25NEGOT-PKTSIZE, and ZX25NEGOT-THRUPUT
(in X.25 networks)
specify the action to be taken when a call request containing an unacceptable
value for one of these attributes is received. If an attribute has been defined as
negotiable (its value set to ZSPI-VAL-TRUE) and an unacceptable value is
received, then a call-accept packet containing an acceptable value is sent to the
network. If the attribute has been defined as non-negotiable (its value set to
ZSPI-VAL-FALSE), then the call request is denied.
ZX25PORT
is the new logical port number, in X.25 networks, to be used by the subdevice.
The range of values is 0 through 9999.
ZX25PRICALL
used only for the DATAPAC network, controls the ability to make priority
calls. If this field is set to ZSPI-VAL-TRUE, the priority call capability is
enabled; if it is set to ZSPI-VAL-FALSE, the capability is disabled. For
networks other than DATAPAC, this field must be set to ZSPI-VAL-FALSE.
The default value is ZSPI-VAL-FALSE.
ZX25REVERSECHG
controls, for X.25 networks, whether an outgoing call request asks that the
recipient pay the charges. If this field is set to ZSPI-VAL-TRUE, the outgoing
call request asks the recipient to pay the charge; if it is set to ZSPI-VAL-
FALSE, the recipient is not asked to pay the charge.