OSI/AS Management Programming Manual

ALTER PROFILE Command
Commands and Responses
5–64 056785 Tandem Computers Incorporated
ZIP-X25-SNDCF
controls the the subnetwork dependent convergence facility (SNDCF). This
parameter is meaningful only if the Transport Layer protocol uses the OSI
internet protocol (IP) to communicate, via the SNDCF, with an X.25 network.
If this field is set to ZSPI-VAL-TRUE, the SNDCF is enabled; if it is set to ZSPI-
VAL-FALSE, the SNDCF is disabled. See “Operational Notes” for further
information.
ZX25CUG-TYPE
specifies the type of closed user group (CUG) facility. This attribute is used
only for X.25 networks. The possible values are:
Value Meaning
ZOSI-VAL-X25CUG-TYPE-BASIC Basic CUG format
ZOSI-VAL-X25CUG-TYPE-EXT Extended CUG format
ZOSI-VAL-X25CUG-TYPE-BASICOA Basic CUG format with outgoing access
ZOSI-VAL-X25CUG-TYPE-EXTOA Extended CUG format with outgoing access
If no value is provided for X25CUG, X25CUGTYPE will default to ZOSI-VAL-
X25CUG-TYPE-BASIC. If X25CUG is 0 to 99, X25CUGTYPE can be any of the
four values, and will default to ZOSI-VAL-X25CUG-TYPE-BASIC. If X25CUG
is 100 to 9999, X25CUGTYPE must be ZOSI-VAL-X25CUG-TYPE-EXT or
ZOSI-VAL-X25CUG-TYPE-EXTOA, and will default to ZOSI-VAL-X25CUG-
TYPE-EXT. If you do not provide a value, the value of the CUGTYPE attribute
in X25AM is used.
ZX25BCUG
specifies the bilateral closed user group ID sent in every call-request packet.
This attribute is used only for X.25 networks. The value is an integer from 0
through 9999. To clear a previously specified BCUG, assign the value ZOSI-
VAL-BCUG-RESET.
ZX25RPOA
specifies the Recognized Private Operating Agency (RPOA) transit network(s)
in the facility field of a call-request packet. This attribute is used only for X.25
networks. An RPOA transit network is indicated by the Data Network
Identification Code (DNIC), which is an integer with the range 0 through 9999.
There can be 0 through 7 DNICs in the X25RPOA integer list. To clear a
previously specified RPOA, assign the value ZOSI-VAL-RPOA-RESET.
ZX25RPOA-DNIC-CNT
specifies the number of DNICs in the ZX25RPOA integer list. The value is an
integer from 0 through 7.