OSI/AS Management Programming Manual
ALTER SERVICE Command
Commands and Responses
056785 Tandem Computers Incorporated 5–77
ZX25REMOTENET
specifies the addressing convention you want used when building the called
address in the call-request packet. The values for this field are as follows:
ZOSI-VAL-X25-NETID-VANILLA Remote network is ISO 8208.
ZOSI-VAL-X25-NETID-DATAPAC Remote network is DATAPAC.
ZOSI-VAL-X25-NETID-TELENET Remote network is TELENET.
ZOSI-VAL-X25-NETID-TRANSPAC Remote network is TRANSPAC.
ZOSI-VAL-X25-NETID-TYMNET Remote network is TYMNET.
ZOSI-VAL-X25-NETID-PSS Remote network is PSS.
ZOSI-VAL-X25-NETID-DATEXP Remote network is DATEXP.
ZOSI-VAL-X25-NETID-UNINET Remote network is UNINET.
ZOSI-VAL-X25-NETID-DATANET Remote network is DATANET.
ZOSI-VAL-X25-NETID-DDXP Remote network is DDXP.
ZOSI-VAL-X25-NETID-X25NP No port number to be used.
ZOSI-VAL-X25-NETID-X25UD Port number is in user data field.
ZOSI-VAL-X25-NETID-X25XA Extended address format is used.
ZOSI-VAL-X25-NETID-X25SA Subaddress is used.
The value initially set by the OSI manager is null.
ZX25THRUPUT
specifies the throughput class limit for X.25 networks. The value is entered as
the throughput class limit for calls received, followed by a comma, followed
by the throughput class limit for calls initiated. The range for both integers is
3 through 12. The initial values are nulls
ZX25PVC
is the channel number of the permanent virtual circuit (PVC) to which the X.25
subdevice being altered is bound. The range of values is 1 through 4095 for all
network types except TRANSPAC. The range of values for TRANSPAC
networks is 0 through 4095. Initially, the OSI manager assigns no PVC. To
reset this attribute to its default value (no PVC assigned), assign it the value
ZOSI-VAL-PVC-RESET.
ZIP-NULL-LAYER
controls the generation of the header for the inactive subset (the null Network
Layer) of the OSI internet protocol (IP). If this field is set to ZSPI-VAL-TRUE,
the inactive-subset header is enabled, and the full subset of the IP is disabled.
If it is set to ZSPI-VAL-FALSE, the inactive-subset header is disabled, and the