OSI/AS Management Programming Manual
ALTER SERVICE Command
Commands and Responses
5–92 056785 Tandem Computers Incorporated
TRUE. The value initially set by the OSI manager for ZVSN2 is ZSPI-VAL-
FALSE.
The version is negotiated between the session entities at each end of the
connection. If an application using OSI/AS initiates the connection, OSI/AS
will propose either or both versions, depending on the settings of ZVSN1 and
ZVSN2. If an application using OSI/AS is the responder, OSI/AS will accept
the connection if there is a match between a proposed version and the settings
of ZVSN1 and ZVSN2. If both versions are proposed and both fields are set to
ZSPI-VAL-TRUE, OSI/AS will establish a protocol version 2 connection.
ZRFSPDURECVPERMANENTTHLD
is the threshold value that the Session Layer compares to the Layer 5 counter
ZRFSPDURECVPERMANENT, described under the STATISTICS SERVICE
command. OSI/AS generates a ZOSI-EVT-L5-THLD event message whenever
the counter value is nonzero and dividing the counter value by the threshold
value leaves a remainder of zero. The values range from 0 through 65535. If
the threshold is set to 0, L5-THLD event messages are never generated for this
counter. The value initially set by the OSI manager is 0.
ZRFSPDUSENTPERMANENTTHLD
is the threshold value that the Session Layer compares to the Layer 5 counter
ZRFSPDUSENTPERMANENT, described under the STATISTICS SERVICE
command. OSI/AS generates a ZOSI-EVT-L5-THLD event message whenever
the counter value is nonzero and dividing the counter value by the threshold
value leaves a remainder of zero. The values range from 0 through 65535. If
the threshold is set to 0, L5-THLD event messages are never generated for this
counter. The value initially set by the OSI manager is 0.
ZRFSPDURECVTEMPORARYTHLD
is the threshold value that the Session Layer compares to the Layer 5 counter
ZRFSPDURECVTEMPORARY, described under the STATISTICS SERVICE
command. OSI/AS generates a ZOSI-EVT-L5-THLD event message whenever
the counter value is nonzero and dividing the counter value by the threshold
value leaves a remainder of zero. The values range from 0 through 65535. If
the threshold is set to 0, L5-THLD event messages are never generated for this
counter. The value initially set by the OSI manager is 0.
ZABSPDUSENTPROTERRORTHLD
is the threshold value that the Session Layer compares to the Layer 5 counter
ZABSPDUSENTPROTERROR, described under the STATISTICS SERVICE
command. OSI/AS generates a ZOSI-EVT-L5-THLD event message whenever
the counter value is nonzero and dividing the counter value by the threshold
value leaves a remainder of zero. The values range from 0 through 65535. If
the threshold is set to 0, L5-THLD event messages are never generated for this
counter. The value initially set by the OSI manager is 0.