OSI/AS Management Programming Manual

INFO ENTRY Command
Commands and Responses
5–118 056785 Tandem Computers Incorporated
ZNSAP-NIBBLE
is the length of the NSAP address specified in ZNSAP-LEN. The range of
values is 0 through 40 nibbles. You must use this field when using odd length
NSAPs. For example, if the NSAP address is “ABC”. The ZNSAP value would
be “ABC0”. The NSAP-LEN field would be “2” and the NSAP-NIBBLE field
would be “3.”
ZL3-PROF
is the L3 profile that was specified when the #APPL entry name was
configured.
ZL4-PROF
is the L3 profile that was specified when the #APPL entry name was
configured.
ZL5-PROF
is the L5 profile that was specified when the #APPL entry name was
configured.
ZL3-SERVR
is the L3 server that was specified when the #APPL entry name was
configured.
ZL4-SERVR
is the L4 server that was specified when the #APPL entry name was
configured.
ZL5-SERVR
shows the L5 server that was specified when the #APPL entry name was
configured.
ZDEL-TIME
indicates whether or not an SU created from this application entry will be
deleted or saved after the connection is completed. A value of 0 indicates that
the SU will be deleted when the connection is finished, and is called a
dynamic SU. A value of -1D indicates that the SU will be saved when the
connection is finished, and is called a static SU.
ZLOOPBACK
shows whether the application entry name requests a loopback connection at
the session layer.