OSI/AS Management Programming Manual

INFO ENTRY Command
Commands and Responses
056785 Tandem Computers Incorporated 5–119
ZOSI-MAP-INFO-ENTRY-NSAP
is an extensible structured token that contains the current attributes for the
specified NSAP. ZOSI-DDL-INFO-ENTRY-NSAP contains the following fields:
ZL4-SERVR
is the indirect-process-name of the TSP process that services the specified NSAP.
ZL4-PROF
is the name of the Layer 4 PROFILE used when a TSP subdevice is configured
for communication to or from the specified NSAP.
ZSNPA-LEN
is the length (in bytes) of the SNPA in ZSNPA. The range of values is 0
through 14 bytes.
ZSNPA
specifies the SNPA for the subnetwork that contains the local end system and
that corresponds to the specified NSAP. The value is a character string of an
even number of hexadecimal digits.
ZNETADDR-MODE
is the addressing mode of the network service. The values for this attribute
are as follows:
ZOSI-VAL-NETADDR-MODE-NORMAL 1984 X.25 network or any LAN
ZOSI-VAL-NETADDR-MODE-X25-1980 1980 X.25 network
ZL3-PROF
is the name of the Layer 3 PROFILE used when a TSP subdevice is configured
for communication through the specified SNPA.
ZOSI-MAP-INFO-ENTRY-SNPA
is an extensible structured token that contains the current attributes for the
specified SNPA. ZOSI-DDL-INFO-ENTRY-SNPA contains the following fields:
ZL3-SERVR
is the indirect-process-name of the NSP process that services the specified SNPA.
ZL3-PROF
is the L3 profile that was specified when the NSAP entry was configured.