OSI/AS Management Programming Manual

ManualsBrandsHP ManualsServerHP NonStop G-Series

211

212

213

214

215

216

217

218

219

220

INFO PROFILE Command

Commands and Responses

5–128 056785 Tandem Computers Incorporated

ZCOM-TKN-OBJTYPE and ZCOM-TKN-OBJNAME

are described in the Communications Management Programming Manual.

For each PROFILE identified by a ZCOM-TKN-OBJNAME token, the response

includes one of the following tokens:

ZOSI-MAP-INFO-PROF-L3 for a Layer 3 PROFILE

ZOSI-MAP-INFO-PROF-L4 for a Layer 4 PROFILE

ZOSI-MAP-INFO-PROF-L5 for a Layer 5 PROFILE

ZOSI-MAP-INFO-PROF-L3

is an extensible structured token that contains the current attributes of the

specified Layer 3 PROFILE. ZOSI-DDL-INFO-PROF-L3 contains the following

fields:

ZX25ACCEPTCHG

controls whether the recipient pays the charge for incoming calls on X.25

networks, if requested by the incoming call request. If this field is set to ZSPI-

VAL-TRUE, the recipient accepts the call and pays the charge; if it is set to

ZSPI-VAL-FALSE, such calls are not accepted.

ZX25CUG

is the optional closed user group identifier (CUG ID) that is sent in call-request

packets in X.25 networks. The range of values is 0 through 9999. The default

value is null (that is, no CUG ID specified), which directs X25AM to send the

CUG ID of the associated X25AM line.

ZX25DESTADDR

is the network address used by the subdevice as the called address in outgoing

call-request packets in X.25 networks. The network address is a string of up to

15 decimal digits (0 through 9).

ZX25NEGOT-L3-WIN, ZX25NEGOT-PKTSIZE, and ZX25NEGOT-THRUPUT

(in X.25 networks)

specify the action to be taken when a call request containing an unacceptable

value for one of these attributes is received. If an attribute has been defined as

negotiable (its value set to ZSPI-VAL-TRUE) and an unacceptable value is

received, then a call-accept packet containing an acceptable value is sent to the

network. If the attribute has been defined as non-negotiable (its value set to

ZSPI-VAL-FALSE), then the call request is denied.

ZX25PORT

is the logical port number, in X.25 networks, used by the subdevice. The range

of values is 0 through 9999.