OSI/AS Management Programming Manual

INFO PROFILE Command
Commands and Responses
056785 Tandem Computers Incorporated 5–129
ZX25PRICALL
used only for the DATAPAC network, controls the ability to make priority
calls. If this field is set to ZSPI-VAL-TRUE, the priority call capability is
enabled; if it is set to ZSPI-VAL-FALSE, the capability is disabled. For
networks other than DATAPAC, this field is always ZSPI-VAL-FALSE.
ZX25REVERSECHG
controls, for X.25 networks, whether an outgoing call request asks that the
recipient pay the charges. If this field is set to ZSPI-VAL-TRUE, the outgoing
call request asks the recipient to pay the charge; if it is set to ZSPI-VAL-
FALSE, the recipient is not asked to pay the charge.
ZX25REMOTENET
specifies the addressing convention used when building the called address in
the call-request packet. The values for this field are as follows:
ZOSI-VAL-X25-NETID-VANILLA Remote network is ISO 8208.
ZOSI-VAL-X25-NETID-DATAPAC Remote network is DATAPAC.
ZOSI-VAL-X25-NETID-TELENET Remote network is TELENET.
ZOSI-VAL-X25-NETID-TRANSPAC Remote network is TRANSPAC.
ZOSI-VAL-X25-NETID-TYMNET Remote network is TYMNET.
ZOSI-VAL-X25-NETID-PSS Remote network is PSS.
ZOSI-VAL-X25-NETID-DATEXP Remote network is DATEXP.
ZOSI-VAL-X25-NETID-UNINET Remote network is UNINET.
ZOSI-VAL-X25-NETID-DATANET Remote network is DATANET.
ZOSI-VAL-X25-NETID-DDXP Remote network is DDXP.
ZOSI-VAL-X25-NETID-X25NP No port number to be used.
ZOSI-VAL-X25-NETID-X25UD Port number is in user data field.
ZOSI-VAL-X25-NETID-X25XA Extended address format is used.
ZOSI-VAL-X25-NETID-X25SA Subaddress is used.
ZX25THRUPUT
specifies the throughput class limit for X.25 networks. The value is the
throughput class limit for calls received, followed by a comma, followed by
the throughput class limit for calls initiated. The range for both integers is 3
through 12.