OSI/AS Management Programming Manual

INFO SERVICE Command
Commands and Responses
5–142 056785 Tandem Computers Incorporated
ZOSI-MAP-INFO-SERV-L3
is an extensible structured token that contains the current attributes of the
specified Layer 3 SERVICE. ZOSI-DDL-INFO-SERV-L3 contains the following
fields:
ZX25ACCEPTCHG
controls whether the recipient pays the charge for incoming calls on X.25
networks, if requested by the incoming call request. If this field is set to ZSPI-
VAL-TRUE, the recipient accepts the call and pays the charge; if it is set to
ZSPI-VAL-FALSE, such calls are not accepted.
ZX25CUG
is the optional closed user group identifier (CUG ID) that is sent in call-request
packets in X.25 networks. The range of values is 0 through 9999. The default
value is null (that is, no CUG ID specified), which directs X25AM to send the
CUG ID of the associated X25AM line.
ZX25DESTADDR
is the network address to be used by the subdevice as the called address in
outgoing call-request packets in X.25 networks. The network address is a
string of up to 15 decimal digits (0 through 9).
ZX25NEGOT-L3-WIN, ZX25NEGOT-PKTSIZE, and ZX25NEGOT-THRUPUT
(in X.25 networks)
specify the action to be taken when a call request containing an unacceptable
value for one of these attributes is received. If an attribute has been defined as
negotiable (its value set to ZSPI-VAL-TRUE) and an unacceptable value is
received, then a call-accept packet containing an acceptable value is sent to the
network. If the attribute has been defined as non-negotiable (its value set to
ZSPI-VAL-FALSE), then the call request is denied.
ZX25PORT
is the logical port number, in X.25 networks, to be used by the subdevice. The
range of values is 0 through 9999.
ZX25PRICALL
used only for the DATAPAC network, controls the ability to make priority
calls. If this field is set to ZSPI-VAL-TRUE, the priority call capability is
enabled; if it is set to ZSPI-VAL-FALSE, the capability is disabled. For
networks other than DATAPAC, this field is always ZSPI-VAL-FALSE.
ZX25REVERSECHG
specifies, for X.25 networks, whether an outgoing call request asks that the
recipient pay the charges. If this field is set to ZSPI-VAL-TRUE, the outgoing