OSI/AS Management Programming Manual

INFO SERVICE Command
Commands and Responses
5–158 056785 Tandem Computers Incorporated
command. OSI/AS generates a ZOSI-EVT-ACSE-THLD event message
whenever the counter value is nonzero and dividing the counter value by the
threshold value leaves a remainder of zero. The values range from 0 through
65535. If the threshold is set to 0, ACSE-THLD event messages are never
generated for this counter.
ZACPMABORTSSENTTHLD
is the threshold value that ACSE compares to the counter
ZACPMABORTSSENT, described under the STATISTICS SERVICE command.
OSI/AS generates a ZOSI-EVT-ACSE-THLD event message whenever the
counter value is nonzero and dividing the counter value by the threshold
value leaves a remainder of zero. The values range from 0 through 65535. If
the threshold is set to 0, ACSE-THLD event messages are never generated for
this counter.
ZAPABORTSTHLD
is the threshold value that ACSE compares to the counter ZAPABORTS,
described under the STATISTICS SERVICE command. OSI/AS generates a
ZOSI-EVT-ACSE-THLD event message whenever the counter value is nonzero
and dividing the counter value by the threshold value leaves a remainder of
zero. The values range from 0 through 65535. If the threshold is set to 0,
ACSE-THLD event messages are never generated for this counter.
ZACPMASSOCPREJECTSTHLD
is the threshold value that ACSE compares to the counter
ZACPMASSOCPREJECTS, described under the STATISTICS SERVICE
command. OSI/AS generates a ZOSI-EVT-ACSE-THLD event message
whenever the counter value is nonzero and dividing the counter value by the
threshold value leaves a remainder of zero. The values range from 0 through
65535. If the threshold is set to 0, ACSE-THLD event messages are never
generated for this counter.
ZSPI-TKN-RETCODE, ZSPI-TKN-ERRLIST, ZSPI-TKN-ENDLIST, and ZSPI-
TKN-CONTEXT
are described in the Distributed Systems Management (DSM) Programming Manual.
Operational Notes
The following conditions, based on settings of fields in the Layer 3 SERVICE and
PROFILE tokens, determine whether the full subset of the OSI internet protocol (IP) is
enabled:
For X25AM lines, the full subset of the IP is enabled if ZIP-X25-SNDCF is set to
ZSPI-VAL-TRUE; it is disabled if ZIP-X25-SNDCF is set to ZSPI-VAL-FALSE. The
ZIP-NULL-LAYER and ZESIS-ENABLE fields are ignored.
For TLAM lines, these conditions apply: