OSI/AS Management Programming Manual

RESETSTATS SERVICE Command
Commands and Responses
056785 Tandem Computers Incorporated 5–197
counter value by the threshold value leaves a remainder of zero. The range of
values is 0 through 65535; 16 bits of the field is reserved for Tandem use. If the
threshold is set to 0, L5-THLD event messages are never generated for this
counter.
ZRFSPDUSENTTEMPORARY
is the number of times the Session Layer has sent or has attempted to send an
RF-SPDU with a reason code of “SS user not attached to SSAP (130)” or “SPM
congestion at connect time (131).” The range of values is 0 through 65535; 16
bits of the field is reserved for Tandem use. The counter wraps around when
it exceeds 65535.
ZRFSPDURECVOTHER
is the number of times the Session Layer has received an RF-SPDU with a
reason code of “rejection by SPM: reason not specified (133),” or “temporary
congestion, issued by user (1),” or “rejection by called session service user (2).”
The range of values is 0 through 65535; 16 bits of the field is reserved for
Tandem use. The counter wraps around when it exceeds 65535.
ZRFSPDUSENTOTHER
is the number of times the Session Layer has sent or has attempted to send an
RF-SPDU with a reason code of “rejection by SPM: reason not specified
(133),” or “temporary congestion, issued by user (1),” or “rejection by called
session service user (2).” The range of values is 0 through 65535; 16 bits of the
field is reserved for Tandem use. The counter wraps around when it exceeds
65535.
ZABSPDURECVNOREASON
is the number of times the Session Layer has received an abort session protocol
data unit (AB-SPDU) in which the transport disconnect parameter bit 4 is set
to 1, indicating “no reason.” The range of values is 0 through 65535; 16 bits of
the field is reserved for Tandem use. The counter wraps around when it
exceeds 65535.
ZABSPDUSENTNOREASON
is the number of times the Session Layer has sent or has attempted to send an
AB-SPDU in which the transport disconnect parameter bit 4 is set to 1,
indicating “no reason.” The range of values is 0 through 65535; 16 bits of the
field is reserved for Tandem use. The counter wraps around when it exceeds
65535.
ZABSPDURECVPROTERROR
is the number of times the Session Layer has received an AB-SPDU in which
the transport disconnect parameter bit 3 is set to 1, indicating a protocol error.