OSI/AS Management Programming Manual

RESETSTATS SERVICE Command
Commands and Responses
056785 Tandem Computers Incorporated 5–209
ZRLRE-REJECT-APDUS-SENT
contains the number of times the ACSE service sends, or attempts to send, a
ReLease REsponse Reject (RLRE-) APDU. This counter wraps around upon
overflow. The range of values is 0 through 65535.
ZSPI-TKN-RETCODE, ZSPI-TKN-ERRLIST, ZSPI-TKN-ENDLIST, and ZSPI-
TKN-CONTEXT
are described in the Distributed Systems Management (DSM) Programming Manual.
Operational Notes
The RESETSTATS SERVICE command must be sent to a TAPS process; it cannot
be handled by the OSI manager process.
A timestamp is associated with each counter returned, indicating when the sample
was taken. Several counters can share the same timestamp. In addition, there is a
second timestamp associated with each resettable counter, recording when the
counter was last reset. The RESETSTATS command updates the reset timestamp
counters after the response is sent.
To reset statistics for the Layer 3 or Layer 4 SERVICE, you must direct a
RESETSTATS SERVICE command to the OSI/TS subsystem. For details, refer to
the Tandem OSI/TS Management Programming Manual.
To reset the Layer 5, Layer 6, and/or ACSE counters for an entire subsystem, you
must send a RESETSTATS SERVICE command to each TAPS process in the
subsystem.
ACSE counters apply for normal mode, but do not apply for X.410-1984 mode.
Layer 6 counters apply regardless of mode.