OSI/AS Management Programming Manual

RESETSTATS SUBSYS Command
Commands and Responses
5–220 056785 Tandem Computers Incorporated
ZREG-FAIL-L4-PROF
is the number of register requests that failed because the Layer 4 PROFILE was
not found.
ZREG-FAIL-L3-PROF
is the number of register requests that failed because the Layer 3 PROFILE was
not found.
ZREG-FAIL-INTL
is the number of register requests that failed because of an internal error.
ZMAX-EVER-L5-PROFS
is the maximum number of Layer 5 PROFILE objects that have been
configured simultaneously in the specified subsystem.
ZCURR-L5-PROFS
is the number of Layer 5 PROFILE objects that are currently configured in the
specified subsystem.
ZREG-FAIL-L5-PROF
is the number of register requests that failed because the Layer 5 PROFILE was
not found.
ZREG-FAIL-ADD-SU-SPI-TAPS
is the number of register requests that failed because an ADD SU command
failed on the local TAPS.
ZREG-FAIL-ADD-SU-FS-TAPS
is the number of register requests that failed because an ADD SU command
sent to the local TAPS failed with a file-system error.
ZSPI-TKN-RETCODE, ZSPI-TKN-ERRLIST, and ZSPI-TKN-ENDLIST
are described in the Distributed Systems Management (DSM) Programming Manual.
Operational Note
A timestamp is associated with each counter returned, indicating when the sample
was taken. Several counters can share the same timestamp. In addition, there is a
second timestamp associated with each resettable counter, recording when the counter
was last reset. The RESETSTATS command updates the reset timestamp counters after
the response is sent.