OSI/AS Management Programming Manual

STATISTICS SERVICE Command
Commands and Responses
5–238 056785 Tandem Computers Incorporated
is, they have been created with a ZDEL-TIME of -1D. A static SU that has been
disconnected but has not been reused for an attach or a connect request will
increment this field by 1. This field will not be reset when RESET is specified.
ZAVAIL-SU
is the number of subdevices that are available for use in the specified TAPS
process. It indicates the number of connections that can still be established.
The range is from ZMAXCONNS to 0. When zero is reached, no more
connections are established by the TAPS process. This field will not be reset
when RESET is specified.
ZOSI-MAP-STATS-SERV-L6
is an extensible structured token that contains current statistics for the Layer 6
SERVICE. ZOSI-DDL-STATS-SERV-L6 contains the following fields:
ZRESET-TMSTP
is the time and date when the statistics were last reset.
ZSAMPLE-TMSTP
is the time and date when this statistics sample was taken.
ZCPRPPDURECVNOREASON
is the number of times the Presentation Layer has received a connect
presentation reject presentation protocol data unit (CPR-PPDU) with a reason
code of “reason not specified (0).” The range of values is 0 through 65535; 16
bits of the field is reserved for Tandem use. The counter wraps around when
it exceeds 65535.
ZCPRPPDUSENTNOREASON
is the number of times the Presentation Layer has sent or has attempted to
send a CPR-PPDU with a reason code of “reason not specified (0).” The range
of values is 0 through 65535; 16 bits of the field is reserved for Tandem use.
The counter wraps around when it exceeds 65535.
ZCPRPPDURECVTRANSIENTGROUP
is the number of times the Presentation Layer has received a CPR-PPDU with
a reason code of “temporary congestion (1)” or “no PSAP available (7).” The
range of values is 0 through 65535; 16 bits of the field is reserved for Tandem
use. The counter wraps around when it exceeds 65535.
ZCPRPPDUSENTTRANSIENTGROUP
is the number of times the Presentation Layer has sent or has attempted to
send a CPR-PPDU with a reason code of “temporary congestion (1)” or “no
PSAP available (7).” The range of values is 0 through 65535; 16 bits of the field
is reserved for Tandem use. The counter wraps around when it exceeds 65535.