OSI/AS Management Programming Manual

STATISTICS SERVICE Command
Commands and Responses
5–246 056785 Tandem Computers Incorporated
ZRLRE-ACCEPT-APDUS-SENT
is the number of times the ACSE service sends, or attempts to send, a ReLease
REsponse Accept (RLRE+) APDU. The range of values is 0 through 65535.
The counter wraps around when it exceeds 65535.
ZRLRE-REJECT-APDUS-RECV
is the number of times the ACSE service receives a ReLease REsponse Reject
(RLRE-) APDU. The range of values is 0 through 65535. The counter wraps
around when it exceeds 65535.
ZRLRE-REJECT-APDUS-SENT
is the number of times the ACSE service sends, or attempts to send, a ReLease
REsponse Reject (RLRE-) APDU. The range of values is 0 through 65535. The
counter wraps around when it exceeds 65535.
ZSPI-TKN-RETCODE, ZSPI-TKN-ERRLIST, ZSPI-TKN-ENDLIST, and ZSPI-
TKN-CONTEXT
are described in the Distributed Systems Management (DSM) Programming Manual.
Operational Notes
The STATISTICS SERVICE command must be sent to a TAPS process; it cannot be
handled by the OSI manager process.
To obtain statistics for the Layer 3 or Layer 4 SERVICE, you must direct a
STATISTICS SERVICE command to the OSI/TS subsystem. For details, refer to
the Tandem OSI/TS Management Programming Manual.
To calculate the total Layer 5, Layer 6, and/or ACSE counts for an entire
subsystem, you must send a STATISTICS SERVICE command to each TAPS
process in the subsystem and then add up the returned values.
ACSE counters apply for normal mode, but do not apply for X.400-1984 mode.
Layer 6 counters apply regardless of mode.