OSI/AS Management Programming Manual

11: ZOSI-EVT-L6-THLD
Event Messages
6–36 056785 Tandem Computers Incorporated
Token Descriptions
ZCOM-TKN-SUBJ-SERV
is the subject of the event.
ZOSI-TKN-L6-EVENT
indicates which Presentation Layer counter has reached a threshold. The values
are as follows:
ZOSI-VAL-CPR-RECV-TRANSIENT
ZOSI-VAL-CPR-RECV-PERMANENT
ZOSI-VAL-CPR-SENT-PERMANENT
ZOSI-VAL-ARP-SENT-PROT-ERR
ZOSI-TKN-THLD-VAL
is the predefined threshold value that was reached.
ZOSI-TKN-REASON-CODE
is the reason code that caused the threshold to be reached. For group thresholds—
those for counters that record occurrences of more than one reason code—other
reason codes may also have occurred. For information about the reason codes
associated with each counter, refer to the description of ZOSI-MAP-STATS-SERV-
L6 under the STATISTICS SERVICE command. For descriptions of the reason
codes, refer to the presentation protocol standard, ISO 8823.
ZEMS-TKN-EMPHASIS
has the value ZSPI-VAL-FALSE, indicating that this is not a critical event.
ZEMS-TKN-CONSOLE-PRINT
has the value ZSPI-VAL-FALSE, indicating that the EMS compatibility distributor
will not route this event message to the operator console, OPRLOG, or $AOPR
process.
ZOSI-TKN-TIME-LAST-REPT
is the time the threshold was last reached and reported.
ZOSI-TKN-CALLING-PSEL
is the PSEL component of the calling address.
ZOSI-TKN-CALLING-SSEL
is the SSEL component of the calling address.
ZOSI-TKN-CALLING-TSEL
is the TSEL component of the calling address.