OSI/AS Management Programming Manual

12: ZOSI-EVT-L5-THLD
Event Messages
056785 Tandem Computers Incorporated 6–41
ZOSI-TKN-CALLED-TSEL
is the TSEL component of the called address.
ZOSI-TKN-CALLED-NSAP
is the NSAP component of the called address.
ZOSI-TKN-RESP-SSEL
is the SSEL component of the responding address.
ZOSI-TKN-RESP-TSEL
is the TSEL component of the responding address.
ZOSI-TKN-RESP-NSAP
is the NSAP component of the responding address.
ZOSI-TKN-REASON-CODE
is the reason code that caused the threshold to be reached. For group thresholds—
those for counters that record occurrences of more than one reason code—other
reason codes may also have occurred. For information about the reason codes
associated with each counter, refer to the description of ZOSI-MAP-STATS-SERV-
L5 under the STATISTICS SERVICE command. For descriptions of the reason
codes, refer to the session protocol standard, ISO 8327.
Probable Cause
OSI/AS reports this event each time a Session Layer threshold is reached.
Recommended Action
No special action is required. This event is only of interest in applications that monitor
threshold events. You can adjust the Session Layer thresholds to increase or decrease
the frequency of event messages or to completely suppress the generation of this event
message.
Considerations
Thresholds can be adjusted by the OSI subsystem administrator to increase or
decrease the frequency of event messages, or to suppress event-message
generation entirely.
Only the TAPS process issues this event message.
Conditional fields are present when the information is available to the code that
generates the event.
ZOSI-TKN-REASON-CODE is not present when ZOSI-TKN-L5-EVENT is set to
ZOSI-VAL-AB-SENT-PROT-ERR.