OSI/AS Programming Manual

Error Codes
Status and Error Codes
056783 Tandem Computers Incorporated B–13
-121: ZAPS-ERR-SSNULL
Cause. An SPI error was encountered during the execution of the SSNULL procedure.
This is an internal error involving SPI buffer management.
Subcodes. The subcode indicates the error returned by SSNULL. For descriptions of
the SPI errors, refer to the System Procedure Errors and Messages Manual.
Effect. The request is ignored.
Recovery. Follow the standard procedures at your site for contacting the appropriate
support personnel. These procedures might involve contacting your local Tandem
support analyst.
-122: ZAPS-ERR-SSGET
Cause. A subsystem programmatic interface (SPI) error was encountered during the
execution of the SSGET or the SSGETTKN procedure. This is an internal error
involving SPI buffer management.
Subcodes. The subcode indicates the error returned by SSGET or SSGETTKN. For
descriptions of the SPI errors, refer to the System Procedure Errors and Messages Manual.
Effect. The request is ignored.
Recovery. Take a trace of the OSI manager process, as described in the SCF Reference
Manual to Tandem OSI/AS or the Tandem OSI/AS Management Programming Manual.
Then follow the standard procedures at your site for contacting the appropriate
support personnel. These procedures might involve contacting your local Tandem
support analyst.
-123: ZAPS-ERR-SSPUT
Cause. An SPI error was encountered during the execution of the SSPUT or the
SSPUTTKN procedure. This is an internal error involving SPI buffer management.
Subcodes. The subcode indicates the error returned by SSPUT or SSPUTTKN. For
descriptions of the SPI errors, refer to the System Procedure Errors and Messages Manual.
Effect. The request is ignored.
Recovery. Follow the standard procedures at your site for contacting the appropriate
support personnel. These procedures might involve contacting your local Tandem
support analyst.