OSI/AS Programming Manual

Error Subcodes
Status and Error Codes
056783 Tandem Computers Incorporated B–25
Error Subcode Tables Tables B-4 through B-15 list the error subcodes for various types of errors.
Table B-4. Resource Limit Subcodes
Constant (ZAPS-ERR-RESOURCE-) Value Meaning
DCB -101 Data control block
DCB-HEADER -103 Data control block header area
L5-TMSG-BUF -1003 Transport message buffer
MCB -102 Message control block
The corresponding error code is ZAPS-ERR-RESOURCE-LIMIT (value -103).
The following information applies to the resource-limit subcodes:
ZAPS-ERR-RESOURCE-DCB and ZAPS-ERR-RESOURCE-MCB indicate that the
TAPS process was unable to allocate a data control block (DCB) or message control
block (MCB).
Recovery: Ask your system manager to configure more TAPS processes or reduce
the traffic.
ZAPS-ERR-RESOURCE-DCB-HEADER and ZAPS-ERR-RESOURCE-L5-TMSG-
BUF are internal errors.
Recovery: If the error is persistent, follow the standard procedures at your site for
contacting the appropriate support personnel. These procedures might involve
contacting your local Tandem support analyst.