OSI/AS SCF Reference Manual

OSI/AS SCF Commands
OSI/AS SCF Reference Manual—424121-001
2-72
ALTER PROFILE #L4 Command
X25TRANSITDELAY
specifies the transit delay in the facility field of a call-request packet. This attribute
is used only for X.25 networks.
RESET returns this attribute to the #L3 SERVICE X25TRANSITDELAY value.
ALTER PROFILE #L4 Command
An attribute-spec for the ALTER PROFILE #L4 command is one of the following
attribute name and value combinations:
ALTCLASS
specifies the protocol class to be used as an alternative to the preferred protocol
class. See Considerations for the ADD Command
on page 2-50 for a discussion of
the relationship between the ALTCLASS, CLASS, MULTIPLEX, and NETTYPE
attributes.
Value: 0.000 through 65.530 (0 through 65.53 seconds)
[ ALTCLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CHECKSUM { ON | OFF } ]
[ CLASS { 0 | 1 | 2 | 3 | 4 } ]
[ CONNECTTIMEOUT time ]
[ DISCONNTIMEOUT time ]
[ EXPEDITED { ON | OFF } ]
[ EXTENDEDFORMAT { ON | OFF } ]
[ INACTIVETIMEOUT time ]
[ L4WINDOW integer ]
[ MAXREXMIT integer ]
[ MULTIPLEX { ON | OFF } ]
[ NETTYPE { A | B | C } ]
[ RECVSECURITY { “text” | RESET } ]
[ REFTIMEOUT time ]
[ REXMITTIMEOUT time ]
[ SENDSECURITY { “text” | RESET } ]
[ TCONPRI integer ]
[ TPDUSIZE
{ 128 | 256 | 512 | 1024 | 2048 | 4096 | 8192 } ]
[ TTRTIMEOUT time ]
[ TWRTIMEOUT time ]
[ WINDOWTIMEOUT time ]
Value: 0 | 1 | 2 | 3 | 4