OSI/AS SCF Reference Manual

OSI/AS SCF Commands
OSI/AS SCF Reference Manual—424121-001
2-89
ALTER SERVICE #L3 Command
X25RPOA
specifies the Recognized Private Operating Agency (RPOA) transit network(s) in
the facility field of a call-request packet. This attribute is used only for X.25
networks.
RESET returns this attribute to the value of the RPOA attribute in X25AM.
X25THRUPUT
specifies the throughput class limit for calls received (data transmission from the called
DTE) (integer1) and the throughput class limit for calls initiated (data transmission from
the calling DTE) (integer2). This attribute is used only for X.25 networks.
Value: 0 through 9999
An RPOA transit network is indicated by the Data Network
Identification Code (DNIC), which is an integer within the
range 0 through 9999. There can be 0 through 7 DNIC's in
the X25RPOA integer list. If 2 through 7 integers are
included in the list, they must be enclosed in “()” and
separated by blanks or commas.
OSIMGR Default: Defaults to the value of the RPOA attribute in the X25AM
subsystem.
Value: 3 through 12 (for both integer1 and integer2)
OSIMGR Default: Defaults to the sysgen value of the X25AM line in the
X25AM subsystem. The sysgen default value of X25AM is 4
(for both integer1 and integer2).
Value Bits per Second
375
4 150
5 300
6 600
7 1200
8 2400
9 4800
10 9600
11 19200
12 48000
Note. These values are based on the CCITT X.25 recommendations for 1980 and 1984.