OSI/AS SCF Reference Manual

OSI/AS SCF Commands
OSI/AS SCF Reference Manual—424121-001
2-96
ALTER SERVICE #L4 Command
OUTBOUNDCRERRTHLD
is the threshold value that the Transport Layer compares to the counter
OUTBOUNDCRERR. OUTBOUNDCRERR is the number of times the subsystem
timed out waiting for a response to a CR-TPDU or receives a DR-TPDU refusing a
connection request due to protocol error, invalid header, parameter not specified, or
reason not specified.
OUTBOUNDTPDUPROTOERRTHLD
is the threshold value that the Transport Layer compares to the counter
OUTBOUNDTPDUPROTOERR. OUTBOUNDTPDUPROTOERR is the number
of times the subsystem receives a DR-TPDU or ER-TPDU as the response to any
TPDU it initiated other than the CR-TPDU.
PASSIVEMUX
specifies the sharing of X25AM SUs for attaching TSP SUs in anticipation of
multiplexing performed by the remote transport entity (incoming connections). If
this attribute is ON, the TSP process will assume that the remote transport entity
will multiplex all transport connections destined to the same X.25 port (same DTE
address). In this situation, the TSP process will not attempt to create an X25AM SU
for each transport attach request. This will greatly reduce the number of X25AM
SUs created at the time attach requests are made. Note, that the assumption is based
solely on the X.25 port number and not the local TSEL.
RECVSECURITY
specifies whether security checking is performed on incoming CR-TPDUs. If
security checking is specified, only incoming CR-TPDUs that have matching
characters in the protection field are accepted. If a value is not provided, no security
checking is performed. This attribute is valid only when the transport protocol class
is 1, 2, 3, or 4.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for
this counter.
OSIMGR Default: 0
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for
this counter.
OSIMGR Default: 0
Value: ON | OFF
OSIMGR Default: OFF