OSI/AS SCF Reference Manual

OSI/AS SCF Commands
OSI/AS SCF Reference Manual—424121-001
2-100
ALTER SERVICE #L5 Command
RFSPDURECVPERMANENTTHLD
(RF-SPDU received permanent threshold) specifies a threshold value that the
Session Layer compares to the counter “RF SPDU Recv Permanent.”
RF SPDU Recv Permanent is the number of times the Session Layer received an
RF-SPDU with a reason code PV field of “SSAP identifier unknown (129)” or
“proposed protocol versions not supported (132).” This counter wraps around upon
overflow.
RFSPDURECVTEMPORARYTHLD
(RF-SPDU received temporary threshold) specifies a threshold value that the
Session Layer compares to the counter “RF SPDU Recv Temporary.”
RF SPDU Recv Temporary is the number of times the Session Layer received an
RF-SPDU with a reason code PV field of “SS User not attached to SSAP (130)” or
“SPM congestion at connect time (131).” This counter wraps around upon overflow.
RFSPDUSENTPERMANENTTHLD
(RF-SPDU sent permanent threshold) specifies a threshold value that the Session
Layer compares to the counter “RF SPDU Sent Permanent.”
RF SPDU Sent Permanent is the number of times the Session Layer sent or
attempted to send an RF-SPDU with the reason code PV field of “SSAP identifier
unknown (129)” or “proposed protocol versions not supported (132).” This counter
wraps around upon overflow.
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for
this counter.
OSIMGR Default: 0
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for
this counter.
OSIMGR Default: 0
Value: 0 through 65535
If the threshold is 0, threshold events are never generated for
this counter.
OSIMGR Default: 0