OSI/AS SCF Reference Manual

About This Manual
OSI/AS SCF Reference Manual—424121-001
xvi
Manual Contents
Manual Contents
Table i lists the contents of each section and appendix in this manual.
Table i. Manual Contents (page 1 of 2)
Section or Appendix Contents
Section 1, Introduction This section provides an overview of the
OSI/AS product and describes the subsystem
objects. The section also discusses D- to
G-series compatibility.
Section 2, OSI/AS SCF Commands This section discusses the SCF commands
that are specific to the OSI/AS subsystem. It
gives detailed information about each
command along with examples of how the
commands are used.
Section 3, OSI/AS Trace Facility This section describes the OSI/AS Trace
facility and includes an explanation of the
structure of OSIAS processes, PTrace
commands, and trace record displays and
formats.
Appendix A, OSI/AS SCF Summary This section summarizes all the command
syntax of the SCF commands specific to
OSI/AS.
Appendix B, OSI/SCF SCF Error Messages This appendix describes three types of SCF
error messages that apply to the OSI/AS
subsystem:
•
Messages with positive error numbers
are generated by the OSI/AS subsystem.
•
Messages with negative error numbers
are general SCF messages, but are
documented in this appendix because
they have additional cause and recovery
information that is specific to the
OSI/AS subsystem.
•
Messages without error numbers are
generated during command parsing and
are generally self explanatory. In a few
cases, however, additional information
needs to be provided. These cases are
documented in this appendix.
Appendix C, OSI/AS SCF Examples of
Configuration Command Files
This appendix contains examples of
command files of Guardian and SCF
commands to set up particular subsystem
configurations.