OSI/AS SCF Reference Manual

OSI/AS SCF Reference Manual—424121-001
C-1
C
OSI/AS SCF Examples of Configuration
Command Files
This appendix contains examples of command files of Guardian and SCF commands to
set up particular subsystem configurations. Since each of these examples contains a
mixture of SCF and non-SCF commands, use the OBEY command to invoke the
appropriate file. The six example configurations are as follows:
•
OSI/AS on an X.25 Network on page C-2
•
OSI/AS on an X.25 Network With SNDCF and Full-IP on page C-6
•
OSI/AS on a LAN With Full-IP and No ES-IS on page C-8
•
OSI/AS on a LAN With Full-IP and ES-IS on page C-10
•
OSI/AS on a LAN With Null-IP on page C-12
•
OSI/AS, Large Application, on an X.25 Network on page C-14
These examples use the following processes and filenames:
To help you locate these names in the example command files, they are shown in
uppercase.
Process or Filename Description
$OSIM OSI manager process name
$DISK1 Swap volume
TAPS1 TAPS internal name
$TAPS1 TAPS process name
TSP1 TSP internal name
$TSP1 TSP process name
LAM1 TLAM or PAM network internal name
$LAM1 TLAM or PAM network process name
X251 X25AM network internal name
$X251 X25AM network process name
ZOSIDB OSI MIB name
ZOSIDB0 OSI alternate MIB name
$SYSTEM.SYS01.OSIMGR OSI manager process object file
$SYSTEM.SYS01.TAPSOBJ TAPS process object file
$SYSTEM.SYS01.TSPOBJ TSP process object file
$SYSTEM.SYSTEM.SCF SCF object file