OSI/AS SCF Reference Manual

OSI/AS SCF Commands
OSI/AS SCF Reference Manual—424121-001
2-25
ADD ENTRY #APPL Command
APTITLE
defines the AP title for the #APPL entry being added. AP title values are locally
administered.
DELETETIME
indicates whether or not an SU created for this #APPL entry will be deleted or saved
after the connection is completed. A value of 0 indicates that the SU will be deleted
when the connection is finished, and is called a dynamic SU. A value of -1 indicates
that the SU will be saved when the connection is finished, and is called a static SU.
Static SUs can be reused by another connection if that connection desires the same
addresses and configuration used by the first connection. Information about the
previous connection (including error information) is available until the static SU is
deleted or reused this is useful for problem diagnosis. Static SUs remain in the
OSI/AS subsystem until an APS_SUBDEVICE_DISCARD_, an SCF ABORT SU,
or an SCF STOP SU is issued for that SU.
L3PROFILE
identifies the name of the Layer 3 profile that might be used when configuring a
TSP subdevice.
Value: A hexadecimal string (0-9 and A-F) up to 8 digits long. This
string must contain an even number of hexadecimal digits.
Default: No default value is provided.
Value: An APTITLE must be a valid ASN.1 object identifier. It
must contain at least two integers, up to a maximum of 16
integers. The first integer must be between 0 and 2, inclusive.
The second integer must be between 0 and 39, inclusive.
Subsequent integers must be between 0 and 9999, inclusive.
The integer list is enclosed by “{}” or “()”. The integers must
be separated by blanks or commas.
Default: No default value is provided.
Value: 0 | -1
Default: 0
Value: A Layer 3 profile name in the following format:
$osi-mgr-name.#L3.profile-name
Default: No default value is provided.