APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM

OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001

3-49

INFO SUBSYS Errors

The following table lists the most common errors that can occur during the processing of

the INFO SUBSYS command:

For more information on errors specific to APLMGR (OSIAPLMG errors having

positive error numbers), see Appendix B, SCF Error Messages for the APLMGR

Subsystem. For more information on common SCF error messages (errors having

negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual

(for D-series releases) or the SCF Reference Manual for G-Series Releases.

INFO SUBSYS Examples

These examples illustrate how to view the configuration of the subsystem managed by

the APLMGR process named \MARS.$AMGR.

The following command displays basic information on the subsystem configuration:

INFO SUBSYS \MARS.$AMGR

The following display is returned:

This display shows that the maximum number of initiator processes that can be

configured is 32, the maximum number of responder processes is 128, and the name of

the OSI manager process to be used by this FTAM subsystem is \NET.$OSM1.

Message Description

Expecting an existing SCF supported object

name or the character “(“

No APLMGR process by the specified name

could be found. To display valid APLMGR

process names, use the following command:

LISTDEV OSIAPLMG

OSIAPLMG Info SUBSYS \MARS.$AMGR

*MaxFTAMI *MaxFTAMR *OMGRNAME

32 128 \NET.$OSM1