OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-53
LISTOPENS PROCESS Errors
LISTOPENS PROCESS Errors
The following table lists the most common errors that can occur during the processing of
the LISTOPENS PROCESS command:
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on errors specific to FTAM (OSIFTAM errors having
positive error numbers), see Appendix C, SCF Error Messages for the FTAM
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
LISTOPENS PROCESS Examples
The following command requests a list of the current opens to the APLMGR process
called $AMGR:
LISTOPENS PROCESS \MARS.$AMGR
The following display is returned:
Message Description
Expecting an existing SCF supported object
name or the character “(“
No process by the specified name could be
found.
To display valid APLMGR process names,
use one of the following commands:
LISTDEV OSIAPLMG
To display valid initiator and responder
process names, use the following command:
LISTDEV OSIFTAM
To display valid initiator process names only,
use one of the following commands:
LISTDEV TYPE 55, 21
To display valid responder process names
only, use one of the following commands:
LISTDEV TYPE 55, 25
OSIAPLMG Listopens PROCESS \MARS.$AMGR
Primary Opener Backup Opener
Openers PID PID FNUM Reqs
\MARS.$ZNET 2,31 NONE 5 1