OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-60
NAMES null Examples
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on errors specific to FTAM (OSIFTAM errors having
positive error numbers), see Appendix C, SCF Error Messages for the FTAM
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
NAMES null Examples
Issue the following command to request a list of the objects controlled by the APLMGR
process called $AMGR.
NAMES $AMGR
The following display is returned:
The display shows the names of the APLMGR subsystem ($AMGR—the APLMGR
process name), the two configured initiator processes, the two configured responder
processes, the single configured VFS profile, and the alternate collector.
The following example displays the name of an FTAM responder named $FTR1 and the
names of its subdevices:
NAMES $FTR1
The following display is returned:
The display shows the names of the specified responder process (FTR1) and its four
subdevices ($FTR1.#ZF00001 and so on). A similar display is returned for an initiator.
OSIAPLMG Names \MARS.$AMGR
SUBSYS
$AMGR
PROCESS
$AMGR $AMGR.#FTAMI.FTI2 $AMGR.#FTAMI.FTI1
$AMGR.#FTAMR.FTR1
$AMGR.#FTAMR.FTR2
PROFILE
$AMGR.#VFS.VFS1 $AMGR.#FTC
OSIFTAM Names \MARS.$FTR1
PROCESS
$FTR1
SU
$FTR1.#ZF00001 $FTR1.#ZF00002 $FTR1.#ZF00003
$FTR1.#ZF00004