OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-64
NAMES PROCESS Errors
NAMES PROCESS Errors
The following table lists the most common errors that can occur during the processing of
the NAMES PROCESS command:
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on errors specific to FTAM (OSIFTAM errors having
positive error numbers), see Appendix C, SCF Error Messages for the FTAM
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
Message Description
Expecting an existing SCF supported object
name or the character “(”
No process by the specified name could be
found.
To display valid APLMGR process names,
use the following command:
LISTDEV OSIAPLMG
To display valid initiator and responder
process names, use the following command:
LISTDEV OSIFTAM
To display valid initiator names only, use the
following command:
LISTDEV TYPE 55, 21
To display valid responder names only, use
the following command:
LISTDEV TYPE 55, 25
OSIAPLMG E-00017 Object object-name
not found
The internal-name specified as part of
indirect-process-name was not
recognized by the APLMGR process as a
registered internal process name. To display
the currently registered process names, use
the following NAMES command:
NAMES $appl-mgr-name.*