OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-72
NAMES SUBSYS
NAMES SUBSYS
The NAMES SUBSYS command displays the name of the specified APLMGR
subsystem. This command is provided for conformance with SPI conventions for
communications subsystems. NAMES SUBYS is a nonsensitive command.
The NAMES SUBSYS command has the following syntax:
\system-name
identifies the system in which the APLMGR process is running.
$appl-mgr-name
identifies the APLMGR process controlling the subsystem whose objects you want
to list.
NAMES SUBSYS Display Format
The NAMES SUBSYS command returns the name of the specified APLMGR process,
as follows:
NAMES SUBSYS Errors
The following table lists the most common errors that can occur during the processing of
the NAMES SUBSYS command:
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
NAMES SUBSYS [\system-name.]$appl-mgr-name
OSIAPLMG Names SUBSYS \system.$appl-mgr-name
SUBSYS
$appl-mgr-name
Message Description
Expecting an existing SCF supported object
name or the character “(”
No APLMGR process by the specified name
could be found. To display valid APLMGR
process names, use the following command:
LISTDEV OSIAPLMG