OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-79
STATS PROCESS Errors
File System Requests
is the number of requests of each type received by a specified process. The types of
requests are
STATS PROCESS Errors
The following table lists the most common errors that can occur during the processing of
the STATS PROCESS command:
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on errors specific to FTAM (OSIFTAM errors having
positive error numbers), see Appendix C, SCF Error Messages for the FTAM
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
CANCEL DEVICEINFO SETPARAM
CLOSE OPEN WRITEREAD
CONTROL RESETSYNC
CONTROLBUF SETMODE
Message Description
Expecting an existing SCF supported object
name or the character “(”
No process by the specified name could be
found.
To display valid APLMGR process names,
use the following command:
LISTDEV OSIAPLMG
To display valid initiator and responder
process names, use the following command:
LISTDEV OSIFTAM
To display valid initiator names only, use the
following command:
LISTDEV TYPE 55, 21
To display valid responder names only, use
the following command:
LISTDEV TYPE 55, 25
SCP E-00022 Security Violation for
process-name
You entered the RESET option, but you are
not allowed to perform sensitive commands.
For further information on sensitive
commands, see Sensitive and Nonsensitive
Commands on page 1-9.