OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-84
STATS SU Errors
STATS SU Errors
The following table lists the most common errors that can occur during the processing of
the STATS SU command:
For more information on errors specific to FTAM (OSIFTAM errors having positive
error numbers), see Appendix C, SCF Error Messages for the FTAM Subsystem
. For
more information on common SCF error messages (errors having negative error
numbers), see the Subsystem Control Facility (SCF) Reference Manual (for D-series
releases) or the SCF Reference Manual for G-Series Releases.
Message Description
Expecting an existing SCF supported
object name or the character “(”
No process by the specified name could be
found.
To display valid initiator and responder process
names, use the following command:
LISTDEV OSIFTAM
To display valid initiator names only, use the
following command:
LISTDEV TYPE 55, 21
To display valid responder names only, use the
following command:
LISTDEV TYPE 55, 25
OSIFTAM E-00017 Object su-name
Not Found
No subdevice by the specified name could be
found. To display a list of valid SU names, use
the following NAMES command:
NAMES SU $process-name.*
SCF E-00022 Security Violation for
process-name
You entered the RESET option and are not
allowed to perform sensitive commands. For
further information on sensitive commands, see
Sensitive and Nonsensitive Commands on
page 1-9.