OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-87
STATS SUBSYS Consideration
Sample Time
is the date and time that the statistics were gathered.
Configuration
is the current configuration information for each subcategory.
Two types of configuration information are displayed:
Current
is the number of each type of process and profile that currently exists.
MaximumEver
is the maximum number of each type of process and profile that have existed
simultaneously.
Register Requests
are the steps through which applications must go to establish a connection with an
FTAM initiator. In these steps, the APLMGR manager process uses information
obtained from the MIB to determine which FTAM initiator is to handle a request and
to prepare for the connection. Register requests are of the following types:
Received
is the number of register requests APLMGR receives from an application.
Succeeded
is the number of register requests that the APLMGR process successfully
completes.
Failed
is the number of register requests that the APLMGR process rejects.
STATS SUBSYS Consideration
The STATS SUBSYS command is valid only when directed to an APLMGR process.
Note. The STATS SUBSYS command displays the counters before they are reset to 0. To see
the counters after they are reset, you must issue a second STATS SUBSYS command. The
subsequent display shows any activity occurring since the previous reset, or 0, if no activity
has occurred since the reset.