OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-88
STATS SUBSYS Errors
STATS SUBSYS Errors
The following table lists the most common errors that can occur during the processing of
the STATS SUBSYS command:
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
STATS SUBSYS Example
You can use the following command to request statistical information on the subsystem
controlled by the APLMGR process named $AMGR on the \MARS system:
STATS SUBSYS \MARS.$AMGR
The following display is returned:
Message Description
Expecting an existing SCF supported object
name or the character “(”
No APLMGR process by the specified name
could be found. To display valid APLMGR
process names, use the following command:
LISTDEV OSIAPLMG
SCP E-00022 Security Violation for
process-name
You entered the RESET option and are not
allowed to perform sensitive commands. For
further information on sensitive commands,
see Sensitive and Nonsensitive Commands
on page 1-9.
OSIAPLMG Stats SUBSYS \MARS.$AMGR
Reset Time..... 22 Apr 1999, 13:57:24.493
Sample Time.... 22 Apr 1999, 14:38:08.537
Configuration:
Current MaximumEver
FTAMI Process............... 2 2
FTAMR Process............... 2 2
VFS Profile................. 1 1
Register Requests:
Received....... 2D
Succeeded...... 2D Failed.......... 0D