OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-101
Status SU Errors
Status SU Errors
The following table lists the most common errors that can occur during the processing of
the STATUS SU command:
For more information on errors specific to FTAM (OSIFTAM errors having positive
error numbers), see Appendix C, SCF Error Messages for the FTAM Subsystem
. For
more information on common SCF error messages (errors having negative error
numbers), see the Subsystem Control Facility (SCF) Reference Manual (for D-series
releases) or the SCF Reference Manual for G-Series Releases.
Message Description
Expecting an existing SCF supported object
name or the character “(”
No process by the specified name could be
found.
To display valid APLMGR process names,
use the following command:
LISTDEV OSIAPLMG
To display valid initiator or responder names,
use the following command:
LISTDEV OSIFTAM
To display valid initiator names only, use the
following command:
LISTDEV TYPE 55, 21
To display valid responder names, only use
the following LISTDEV command:
LISTDEV TYPE 55, 25
OSIFTAM E-00017 Object su-name
Not Found
No subdevice by the specified name
could be found. To display a list of valid
SU names, use the following NAMES
command:
NAMES SU $process-name.*