OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-106
STATUS SUBSYS Errors
FTAMRs Started
is the number of FTAM responder processes actually started.
Total Openers
is the current number of processes that have opened the APLMGR process. To
determine which processes, issue the LISTOPENS command. For more information,
see the LISTOPENS command.
SUBSYS State
is the state of the subsystem object. This field always contains Defined, because the
APLMGR process can process the command only when the state of the subsystem is
DEFINED.
STATUS SUBSYS Errors
The following table lists the most common errors that can occur during the processing of
the STATUS SUBSYS command:
For more information on errors specific to APLMGR (OSIAPLMG errors having
positive error numbers), see Appendix B, SCF Error Messages for the APLMGR
Subsystem. For more information on common SCF error messages (errors having
negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual
(for D-series releases) or the SCF Reference Manual for G-Series Releases.
Message Definition
Expecting an existing SCF supported
object name or the character
“(”
No APLMGR process by the specified name
could be found. To display valid APLMGR
process names, use the following command:
LISTDEV OSIAPLMG