OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-120
TRACE PROCESS Considerations
TRACE PROCESS Considerations
•
To start a new trace, issue a TRACE command that includes the TO filename
option. When you specify TO filename, a new trace is initiated unless the file
name is invalid, the file cannot be opened, or tracing is already active for the
specified process. A process can have only one trace active at a time.
•
To modify the COUNT, RECSIZE, and/or SELECT options for a trace already in
progress, issue a TRACE command that does not include TO filename,
specifying new values for the options you want to change. To change any options
other than COUNT, RECSIZE, or SELECT, you must stop the trace and start a new
trace.
•
To stop a trace that is currently in progress, issue a TRACE command that includes
only the STOP option.
TRACE PROCESS Errors
The following table lists the most common errors that can occur during the processing of
the TRACE PROCESS command:
Error Message Description
Expecting an existing SCF supported object
name or the character “(“
No process by the specified name could be
found.
To display valid APLMGR process names,
use the following command:
LISTDEV OSIAPLMG
To display valid initiator and responder
process names, use the following
command:
LISTDEV OSIFTAM
To display valid initiator names only, use
the following command:
LISTDEV TYPE 55, 21
To display valid responder names only, use
the following command:
LISTDEV TYPE 55, 25
SCP E-00022 Security Violation for
process-name
You are not allowed to perform sensitive
commands. For further information on
sensitive commands, see Sensitive and
Nonsensitive Commands on page 1-9.