OSI/FTAM and OSI/APLMGR SCF Reference Manual

Attributes for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
4-6
CPU
CPU
CPU specifies the CPU in which the primary process of a process pair is to run when the
process is started, or is currently running.
The value specified must represent a valid CPU number in this Tandem system.
The CPU for the APLMGR process is specified in the RUN command.
DEFUSER
DEFUSER specifies the default user ID and password to be used for file operations for
which a user ID and password were not supplied by the remote user.
There are two forms in which the value of DEFUSER can be specified:
Default: CPU in which the primary APLMGR process is running at the
time the command is executed
Value: Integer, 0 through 15
Objects: PROCESS
Default: None
Value: See description
Objects: PROFILE
" groupid.userid ,
[ password ] "
Specifies the default group ID, user ID, and password.
The group ID, user ID, and password must be entered in
quotation marks and punctuated as shown above. The
maximum length of each string is eight alphanumeric
characters. A password is not required; that field can be
left blank as long as you place a comma after the user
ID and before the quotation marks.
" groupnum.usernum ,
[ password ] "
Specifies the default group and user numbers and the
default password. The group number, user number, and
password must be entered in quotation marks and
punctuated as shown above. The group number and user
number must be in the range of 0 to 255. The maximum
length of the password is eight alphanumeric characters.
A password is not required; that field can be left blank
as long as you place a comma after the user number and
before the quotation marks.