OSI/FTAM and OSI/APLMGR SCF Reference Manual

About This Manual
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
xviii
FTAM Manuals
The following list describes the manuals shown in Figure i on page xvii:
•
The Tandem OSI/FTAM Programming Guide explains important programming
concepts pertaining to the Tandem FTAM application program interface (API) and
describes sequences of procedure calls to use to perform common FTAM
programming operations. This manual also provides an overview of FTAM concepts
for those who have not recently read the ISO 8571 specification.
•
The Tandem OSI/FTAM Programming Reference Manual is the companion manual
to the Tandem OSI/FTAM Programming Guide and provides reference information
on the programmatic interface provided by Tandem FTAM for application programs
that run on a Tandem host using the FTAM initiator. It discusses product
conformance to standards and interoperability, provides information on the FTAM
initiator, and provides reference material for all procedure calls in the FTAM API,
including descriptions of diagnostic and error messages.
•
The OSI/FTAM Responder Manual provides information for programmers writing
applications on remote systems using the services of the Tandem FTAM responder.
This manual discusses the Tandem FTAM responders conformance to standards and
interoperability, describes the operation of the responder, and provides reference
information on diagnostic messages.
•
The OSI/FTAM Configuration and Management Manual describes how to install,
configure, and manage Tandem FTAM. This manual also includes information on
monitoring and adjusting Tandem FTAM to optimize performance, and on
diagnosing and fixing problems.
•
The OSI/FTAM and OSI/APLMGR SCF Reference Manual (this manual) describes
the SCF commands and object types used to configure, control, modify, and inquire
about Tandem FTAM. It contains descriptions of SCF attributes and screen displays
and descriptions of Tandem FTAM-specific PTrace commands and screen displays.
•
The Operator Messages Manual describes system messages and provides an
explanation of the cause, a discussion of the effect on the system, and suggestions
for corrective action. The manual contains a separate section for each Tandem OSI
subsystem, including APLMGR, FTAM, OSI/AS, and OSI/TS. It also contains
separate sections for the X25AM, TCP/IP, and TLAM subsystems (TLAM is
replaced by the PAM subsystem for G-series systems).