OSI/FTAM and OSI/APLMGR SCF Reference Manual

About This Manual
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
xix
Related Manuals
Related Manuals
These manuals contain background information on the Tandem environment:
•
The Introduction to Networking and Data Communications for Himalaya S-Series
Servers provides an overview of Tandem networking and data communications
products.
•
The Introduction to Distributed Systems Management (DSM) introduces the
products and components that are collectively called Distributed Systems
Management. It also discusses subsystem enhancements to support DSM.
•
The Subsystem Control Facility (SCF) Reference Manual describes, for D-series
systems, the operation of SCF and tells system and network managers how to use
SCF to configure, control, and inquire about supported data communications
subsystems. For G-series systems, refer to the SCF Reference Manual for G-Series
Releases.
These manuals contain information on event and problem management:
•
The PTrace Reference Manual tells system and network managers how to display
trace files created by the SCF TRACE command. It provides information that
applies to all subsystems; information specific to Tandem FTAM is provided in
Section 5, PTrace Reference for Tandem FTAM.
•
The ViewPoint Manual describes a multifunction operations console application that
allows the management of a network of systems. The manual describes how to
install, configure, and start ViewPoint for custom applications.
These manuals contain information on underlying OSI subsystems:
•
The OSI/AS Configuration and Management Manual describes how to install,
configure, and manage OSI/AS. This manual also includes information on
monitoring and adjusting OSI/AS to optimize performance, and on diagnosing and
fixing problems.
•
The OSI/TS Configuration and Management Manual is intended for programmers,
system managers, and system operators. It describes how to write Transport Layer
applications that use the Tandem OSI/TS software to communicate with remote
transport users across an OSI network. It also describes how to configure the
Tandem OSI/TS subsystem and how to diagnose configuration and performance
problems.
•
The TCP/IP Configuration and Management Manual describes how to set up and
manage the Tandem NonStop TCP/IP subsystem on a Himalaya S-series server. This
manual is written for system managers, operators, and others who configure and
manage Tandem NonStop TCP/IP.
•
The PAM Configuration and Management Manual describes the Port Access
Method (PAM) subsystem, which allows applications running on Himalaya S-series
servers access to Ethernet and token-ring networks. This manual is written for
system managers, operators, and others who configure and manage network
subsystems on Himalaya S-series servers.