OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Error Messages for the APLMGR Subsystem
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
B-2
OSIAPLMG E00001 Guardian 90 procedure error.
Call procedure-name, Error error-number
Cause: A call was made to the Guardian procedure indicated, and a failure error
was returned.
Effect: The command is not performed.
Recovery: Log the error, noting the procedure name and error number. Follow the
procedures described on page B-1
for collecting relevant information
and contacting appropriate support personnel.
Internal CASE statement range, error E00002
Cause: An internal error occurred.
Effect: The command is not performed.
Recovery: You need to seek additional help. Follow the procedures described on
page B-1
for collecting relevant information and contacting appropriate
support personnel.
OSIAPLMG E00003 Command not allowed when object is in
use.
Cause: You issued a SUSPEND PROCESS or STOP PROCESS command to an
initiator or a responder currently in use (currently open by a user
application).
Effect: The command is not performed.
Recovery: Use the LISTOPENS PROCESS command to determine which
application has opened the process. Wait until the process is no longer
opened and then reissue the SUSPEND PROCESS or STOP PROCESS
command.