OSI/FTAM and OSI/APLMGR SCF Reference Manual

OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
2-1
2
Objects for Tandem FTAM
This section explains the object hierarchy used in Tandem FTAM and, for each object
type, gives a detailed description of how it is used, along with naming conventions,
example names, and states.
APLMGR and FTAM Subsystem Object Hierarchy
The APLMGR subsystem supports three object types: SUBSYS (subsystem),
PROCESS, and PROFILE. Figure 2-1
shows the hierarchical relationships of these three
objects to one another. The SUBSYS object controls the PROCESS and PROFILE
objects. (The null object type is also supported for some commands but is not shown in
the diagram because it is not a true object type and therefore has no place in the
hierarchy.)
The FTAM subsystem supports two object types: PROCESS and SU (subdevice).
Figure 2-2
shows the hierarchical relationship of these two object types; in the Tandem
FTAM subsystem, the PROCESS object controls the SU object. (Again, the null object
is supported but is not shown in the diagram because it is not a true object type and has
no place in the hierarchy.)
Figure 2-1. APLMGR Subsystem Object Hierarchy
Figure 2-2. FTAM Subsystem Object Hierarchy
005CDT .CDD
PROFILEPROCESS
SUBSYS
006CDT .CDD
PROCESS
SU