APLMGR SCF Reference Manual

Objects for Tandem FTAM

OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001

2-14

SUBSYS Object

The SUBSYS object is used to modify and view the configuration of a subsystem. SCF

commands paired with the SUBSYS object are directed to the APLMGR process. The

object is identified with an APLMGR process.

Naming Conventions for the SUBSYS Object

To issue an SCF command to the SUBSYS object, specify the command, followed by

the SUBSYS specification and the name of the APLMGR process:

command SUBSYS [\system-name.]$appl-mgr-name

system-name identifies the system in which the APLMGR process is

running.

appl-mgr-name identifies the APLMGR process that implements the

SUBSYS object. appl-mgr-name is a valid Guardian process name.

You can apply the INFO command to the FTAM environment managed by $AMGR on

the \MARS system as follows:

INFO SUBSYS \MARS.$AMGR

Object State for the SUBSYS Object

The SUBSYS object has one state: DEFINED. This state is achieved whenever the

APLMGR process is running and is displayed by the STATUS SUBSYS command.

Attributes for the SUBSYS Object

The following attributes describe and define SUBSYS objects:

For detailed information on each attribute, see Section 4, Attributes for Tandem FTAM

FTAMIFILE MAXFTAMR

FTAMRFILE MIB

MAXFTAMI OMGRNAME