OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-2
Supported Commands
Table 3-1 does not describe commands supported by underlying subsystems such as
OSI/AS or X25AM. For information on SCF messages for these and other underlying
subsystems, see FTAM Manuals on page xvii and Related Manuals on page xix.
This manual describes the SCF commands that are interpreted specifically for Tandem
FTAM. The Subsystem Control Facility (SCF) Reference Manual (for D-series releases)
or the SCF Reference Manual for G-Series Releases provides general information on
SCF commands. You should be familiar with that information before reading the
subsystem-specific information provided in this manual.
Table 3-1. Subsystem-Specific SCF Commands
Command
Can Be Issued to
APLMGR
Can Be Issued
Directly to FTAM
ABORT X
ACTIVATE X
ADD X
ALLOWOPENS X X
ALTER X
DELETE X
INFO X X
LISTOPENS X X
NAMES X X
START X
STATS X X
STATUS X X
STOP X
STOPOPENS X X
SUSPEND X
TRACE X X
VERSION X X