APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM

OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001

3-16

ADD PROFILE Errors

The following table lists the most common errors that can occur during the processing of

the ADD PROFILE command:

For more information on errors specific to APLMGR (OSIAPLMG errors having

positive error numbers), see Appendix B, SCF Error Messages for the APLMGR

Subsystem. For more information on common SCF error messages (errors having

negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual

(for D-series releases) or the SCF Reference Manual for G-Series Releases.

Message Description

Expecting an existing SCF supported object

name or the character “(“

No APLMGR process by the specified name

could be found. To display valid APLMGR

process names, use the following command:

LISTDEV OSIAPLMG

OSIAPLMG E-00015

Object object-name already defined

The profile-name specified is already

registered. Reenter the command with a new

profile-name or use the ALTER

command to change the attributes of the

existing profile.

TOSIAPLMG E-00019 Invalid object name:

$name.#FTC.process-name

Do not use process-name when

specifying the alternate collector. To specify

the alternate collector, use

$name.#FTC

CP E-00022

Security Violation for process-name

You are not allowed to perform sensitive

commands. For further information on

sensitive commands, see Sensitive and

Nonsensitive Commands on page 1-9.

OSIAPLMG E00503 Missing Required

Attribute: attribute-name

The SCF command issued is missing the

required attribute. Reissue the command,

including the attribute.