APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM

OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001

3-26

ALTER PROFILE

The ALTER PROFILE command changes the value of one or more attributes of a virtual

filestore (VFS) profile in the APLMGR MIB. ALTER PROFILE is a sensitive command.

The ALTER PROFILE command has the following syntax:

\system-name

identifies the system in which the APLMGR process is running.

$appl-mgr-name

identifies the APLMGR process associated with the profile you are changing.

appl-mgr-name is a Guardian process name.

profile-name

identifies the profile you are changing.

attribute-spec

is one of the attribute name and value specifications for the VFS. For descriptions of

each attribute, see Section 4, Attributes for Tandem FTAM.

ALTER PROFILE Consideration

Only one profile can be reconfigured per command.

Note. You cannot alter an alternate collector (FTC) profile. To change an FTC profile,

you must delete it and then add a new one with the desired attributes.

ALTER PROFILE [\system-name.]$appl-mgr-name.#VFS.profile-name,

attribute-spec [ , attribute-spec ]...

attribute-spec is:

[ COMNAME "character-string" ]

[ DEFUSER user-id-password ]

[ PSEL hex-character-string ]

[ SSEL hex-character-string ]

[ TSEL hex-character-string ]

[ NSAP hex-character-string ]

user-id-password is:

{ "groupid.userid , [ password ] " }

{ "groupnum.usernum , [ password ] " }