APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM

OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001

3-27

ALTER PROFILE Errors

The following table lists the most common errors that can occur during the processing of

the ALTER PROFILE command:

For more information on errors specific to APLMGR (OSIAPLMG errors having

positive error numbers), see Appendix B, SCF Error Messages for the APLMGR

Subsystem. For more information on common SCF error messages (errors having

negative error numbers), see the Subsystem Control Facility (SCF) Reference Manual

(for D-series releases) or the SCF Reference Manual for G-Series Releases.

ALTER PROFILE Example

The following command changes the default user ID for a VFS profile named ACCT to

the group number 23, the user number 10, and the default password to ACCESS:

ALTER PROFILE \MARS.$AMGR.#VFS.ACCT , DEFUSER "23.10,ACCESS"

Message Description

Expecting an existing SCF supported object

name or the character “(“

No APLMGR process by the specified name

could be found. To display valid APLMGR

process names, use the following command:

LISTDEV OSIAPLMG

OSIAPLMG E-00017 Object

object-name not found

The profile-name specified was not

recognized by the APLMGR process as a

registered profile name. To display the

currently registered profile names, use the

following NAMES command:

NAMES PROFILE

$appl-mgr-name.*.*

SCP E-00022 Security Violation for

process-name

You are not allowed to perform sensitive

commands. For further information on

sensitive commands, see Sensitive and

Nonsensitive Commands on page 1-9.