OSI/FTAM and OSI/APLMGR SCF Reference Manual

SCF Commands for Tandem FTAM
OSI/FTAM and OSI/APLMGR SCF Reference Manual—421943-001
3-33
DELETE PROFILE
DELETE PROFILE
The DELETE PROFILE command removes the definition of a virtual filestore (VFS)
profile or an alternate collector (FTC) profile from the APLMGR MIB. DELETE
PROFILE is a sensitive command.
The DELETE PROFILE command has the following syntax:
\system-name
identifies the system in which the APLMGR process is running.
$appl-mgr-name
identifies the APLMGR associated with the profile you are deleting.
profile-name
identifies the unique name of the VFS profile you are deleting. An FTC profile does
not have a name.
DELETE PROFILE Considerations
•
For VFS profiles, the DELETE PROFILE command deletes a profile even if it is in
use. A profile can be deleted after a responder is started with no effect to that
responder.
•
Note that a profile must be available when the responder process referencing that
profile is started. If a profile is deleted, it is not available for use.
•
When you delete an FTC profile, all running initiator and responder processes are
immediately updated. All processes immediately start sending all event messages to
the primary collector ($0) only.
DELETE PROFILE [\system-name.]$appl-mgr-name.
{ #VFS.profile-name }
{ #FTC }