OSI/FTAM Configuration and Management Manual

Managing the FTAM Configuration
OSI/FTAM Configuration and Management Manual—421944-001
4-11
Displaying Process Configurations
This display shows that a maximum of eight initiator and eight responder processes can
be configured and that two initiator and two responder processes are currently
configured. The code file for initiator processes is \NET.$SYSTEM.SYS00.FTAMIOBJ,
the code file for responder processes is \NET.$SYSTEM.SYS00.FTAMROBJ, and the
APLMGR MIB file is \NET.$DATA.ZAPLMMIB.ZOSADB. The name of the OSI
manager process in OSI/AS is $OSM1.
Displaying Process Configurations
Using the INFO command with the PROCESS object, you can display relevant
information on a process that you specify in the command line. For example, the
following command to the initiator FTI1 in the example FTAM configuration
INFO PROCESS $AMGR.#FTAMI.FTI1, DETAIL
returns the following display:
Screen displays for all three types of process (APLMGR, initiator, and responder) have
common areas that the INFO PROCESS command (with the DETAIL option) returns:
CPU, BackupCPU, Priority, Codefile, and Name fields.
Additional information provided for initiator processes, shown in the sample display
above, includes the following fields:
•
Swap
•
Threshold (0 in this display, the default value, indicates that no event messages are
ever generated.)
•
MaxAssoc (This display shows a maximum of four concurrent FTAM associations
allowed between this initiator process and remote responders.)
•
FTAMI Address (The address component fields are blank if a common name is
displayed in the ComName field.)
•
ComName (This display shows FTMI1A—the field is blank if an address is
displayed under FTAMI Address.)
OSIAPLMG Detailed Info PROCESS \NET.$AMGR.#FTAMI.FTI1
*CPU................ 1 *BackupCPU.... 2
*Priority........... 180 *Codefile..... \NET.$SYSTEM.SYS00.FTAMIOBJ
*Swap............... \NET.$OSI *Name......... \NET.$FTI1
*Threshold ......... 0
*MaxAssoc........... 4
FTAMI Address:
*PSEL.....
*SSEL.....
*TSEL.....
*NSAP.....
*ComName.. FTMI1A